Laundry Room Makeover
Before and after
Photos from this project
Shop this project
These are affiliate links. If you buy through one I earn a small commission at no extra cost to you. I only link things I actually used.
Tools
- Cricut Maker
- utility knife
- trim puller
- Drill & Driver
- Drill Bit Set
- Miter Saw
- Corner Clamps
- Stud Finder
- Tape Measure
- Table Saw
- Circular Saw
- Kreg Rip Cut Guide
- Kreg Pocket Hole Jig
- Clamps
- Table Saw Push Block
- Kreg Jig 1 1/4" Screws
- Kreg jig
- Orbital Sander
Materials
- you need this tool
- Special Walnut
- planer
- 2 1/2" star bit screws
- Wood Glue
- glue
- screw
- Brass Set Up Blocks
- Butcher Block
- 1 1’4" pocket hole screws
- Set Up Blocks
- Cabinet Hardware (pullout drawer slides with two trash bins)
- Butcher block countertop
- setup blocks
Paint and finish
Watch the build
Source posts
- Fall 2023 One Room Challenge- Week 1
- Fall 2023 One Room Challenge- Week 2: Demo Day
- Fall ’23 ORC Week 3: Baseboards & Frames
- Fall ’23 ORC Week 4- White Oak Paint Wash for Floating Shelves
- Fall ’23 ORC Week 5: Wallpaper
- Fall ’23 ORC Week 6- Wallpapered Appliances
- Fall ’23 ORC Week 7-Shelf Styling!
- How To Build A Cabinet! Part 1: Base Frame
- How To Build a Cabinet! Part 2: The Cabinet Box
- How to Build a Cabinet! Part 3: The Cabinet Door