The Workshop
Photos from this project
Shop this project
These are affiliate links. If you buy through one I earn a small commission at no extra cost to you. I only link things I actually used.
Tools
- Paint roller kit
- Casters
- Caulk gun
- Brad nailer
- Kreg rip cut guide
- Jigsaw
- Circular saw
- Miter saw
- Table Saw
- Stud Finder
- Magnetic Angle Finder for Table Saw
- Level
- Tape Measure
- Drill/Driver
- Kreg Pocket Hole Jig
- Clamps
Materials
- ¾” Plywood
- 2 1/2” Star Bit Wood Screws
- Wood Glue
- 3/4" plywood
- 1/4" plywood
- 1 1/4" screws
- 1 1/2" Brad nails
- Setup Blocks
- brass setup blocks
- Baskets for Shelves
Watch the build
Source posts
- Spring 2023 ORC Week 1: Mood Board
- Spring ’23 ORC Week 2-Table Saw Cart
- Spring ’23 ORC Week 3- DIY Table Dupe
- Spring ’23 ORC Week 4- Miter Saw Cart
- Spring ’23 ORC Week 5- French Cleat Wall
- Spring ’23 ORC Week 6- Tool Storage Part 1
- Spring ’23 ORC Week 7- Tool Storage Part 2
- Sanding Station for French Cleat Tool Wall
- Spring ’23 ORC Week 8- The Final Reveal!
- Faux Library Card Catalogue
- Portable Wood Scrap Storage Cart
- Wooden Magnetic Tool Holder
- DIY Tape Dispenser